12” Seed Belt Conveyor

Find a Dealer
Have a few tons of seed to move? The 12” Ox seed belt conveyor is ready for the challenge.
You can build the Ox 12” Seed Belt Conveyor up to 70 feet. It’s designed for rapid, gentle transfer of seed, because its 12-inch tube and 14-inch belt produce large capacities while avoiding seed damage. But don’t let its gentle nature fool you, the Ox isn’t afraid to get down and dirty.
The way to gently handle seed, fertilizer or any other free flowing commodity. Hydraulic, electric, PTO and Gas over Hydraulic drives are available. Lengths from 25 to 70' in 5' increments. Also available without the transport for use in stationary applications. Add an undercar belt hopper or low-profile feeder hopper for easily unloading trucks or railcars.
Available in 25 to 70 ft. lengths. (In 5 ft. increments)
Top and bottom adjustment for belt tension and tracking.
Belt conveyor provides rapid, gentle transfer of seed.
Steel hopper intake for gravity wagons or seed hopper tanks.
Spout made for gentle transition from the incline belt to the discharge.
Three conveyor belt speeds let you match the delivery rate to your requirements.
Capacities (Electric Drive) |
|||
---|---|---|---|
Elevation | Belt Speed | ||
400 FPM | 675 FPM | 900 FPM | |
25° | 3,200 BPH (4,000 CFH) | 4,275 BPH (5,340 CFH) | 4,960 BPH (6,200 CFH) |
30° | 2,400 BPH (3,000 CFH) | 3,000 BPH (3,700 CFH) | 3,230 BPH (4,000 CFH) |
NOTE: Capacities are approximates, for conveying soybeans, and will vary with material conveyed and conveyor incline.
Tube
12 ga. welded 12” tube with standard wind skirt for belt return. (stainless steel optional)
Belting
14” PVC belt with crescent top surface.
Vulcanized drive roller; self cleaning bottom roller; top and bottom SCM bearings for belt tension and tracking. “S” wrap style drive.
Drive
PTO, electric, hydraulic, or gas over hydraulic drive options.
Electric drive - 400, 675, or 900 FPM belt speed. Jackshaft drive.
Spout
Spout opening is 14¼” x 15¼”.
Transport
Timken roller bearings for highway use. 2” x 3” lower arms and 2” x 4” upper arms. 80” width (30-45’ conveyors) or 108” (50-75’ conveyors).
Belt Speed Conversions |
||
---|---|---|
Electric | Hydraulic | PTO |
400 FPM | 5.3 GPM* | 122 RPM |
675 FPM | 8.9 GPM* | 206 RPM |
900 FPM | 11.9 GPM* | 275 RPM |
* Requires 2250 PSI.
NOTE: The capacity chart used electric drive. The conversion chart shows hydraulic flow rates and PTO speeds needed to match belt speeds with electric drive.
Recommended Horsepower (Electric drive) |
|||
---|---|---|---|
Conveyor Length | Belt Speed | ||
400 FPM | 675 FPM | 900 FPM | |
25' | 5 | 7½ | 10 |
30' | 5 | 7½ | 10 |
35' | 5 | 10 | 10 |
40' | 7½ | 10 | 15 |
45' | 7½ | 10 | 15 |
50' | 7½ | 15 | 15 |
55' | 7½ | 15 | 20 |
60' | 10 | 15 | 20 |
65' | 10 | 15 | 20 |
70' | 10 | 20 | 20 |
75' | 10 | 20 | 20 |
Reach and Elevation (30° incline) |
||||
---|---|---|---|---|
Conveyor Length | A - Elevation | B - Distance | C - Height | D - Reach |
25' | 12½' | 24' | 9 | 6½' |
30' | 15' | 28½' | 9½' | 10' |
35' | 17½' | 33' | 10' | 14' |
40' | 20' | 37' | 13' | 13' |
45' | 22½' | 41½' | 15½' | 13' |
50' | 25' | 46' | 16' | 17' |
55' | 27½' | 50' | 18' | 17½' |
60' | 30' | 54½' | 18' | 21½' |
65' | 32½' | 59' | 20' | 22½' |
70' | 35' | 63' | 20' | 26½' |
Optional spring loaded hopper.
The hopper folds down to get under gravity wagons, trailers, etc., and then raises to minimize spillage.
PTO, electric, hydraulic, and gas over hydraulic drive.
Feeder hoppers
Available in 6, 9, and 12 ft. lengths for added reach.
Stainless steel construction