Reclaim your grain with a Super Scoop from Sudenga
Sudenga Super Scoops are easily mounted (& dismounted) and can load a waiting 1,000 bushel trailer in under 6 minutes.
TAKE CHARGE WITH A SUDENGA SUPER SCOOP
Load piles from flat storage quickly and easily with the 11,000 bushels per hour Super Scoop from Sudenga. The 16″ diameter x 10′ long intake auger feeds an incline conveyor making quick work of grain pile clean up.
STANDARD FEATURES:
- Two styles: 40′ Standard Scoop; 35′ Center Feed Scoop
- 11,000 BPH
- Scoop Blade: 3/16″ blade thickness; 10′ wide on Standard models, 8′ wide on Center Feed models; 16″ helicoid flighting (5/16″ thick) on 4″ pipe (1/4″ wall); double #80 roller chain; pillow block bearings; 122 RPM flight speed; attachment arms for category III 3-point
- Inclined Conveyor: 10 ga. abrasion resistant steel lower trunking and pan; 1″ flame cut sprockets on 2-7/16″ top and bottom shafts; 42,000 pound tensile strength chain; 1/2″ UHMW paddles; 400 ft./min chain speed; 12″ canvas spout
- Undercarriage: Standard scoops only. Caster wheels; hydraulic lift; 3-point attachment to tractor; 11L15 implement tires; Undercarriage supports conveyor when not on the tractor.
- Tractor Specifications: Fits most late model tractors, 90 HP or more (540 RPM PTO speed); category III 3-point is standard (category II requires special mounting pins); Standard Scoops (conveyor outside tire), the distance from the 3-point to the lead edge of the front tire cannot exceed 175″; distance from the tractor PTO to the end of the axle (outside of tire) cannot exceed 55″; Center Feed Scoops (conveyor inside tire), the distance from the centerline of the tractor to the centerline of conveyor is 24″; conveyor is 14″ wide
OPTIONS
- Hydraulic Spout: Power rotation for the pan spout. This option also raises and lowers the spout.
- Dump Hopper: For Standard Scoops only. Bolt-on panel forms a trough on the blade for unloading from trucks or wagons.
For additional product details, photos, videos, and more – click here.