Diameters of 7-1/4″, 9-1/4″ and 11-1/4″
Sweeps include all extension sections, chain reduction drive, belt(s), pulleys(s), belt(s), belt guard, motor mount, and end wheel.
Sweep carrier is included on bins 48′ and larger for uneven floors.
|Sweep Diameter||Approximate Capacities*|
|7-1/4″||To 2050 BPH|
|9-1/4″||To 3700 BPH|
|11-1/4″||To 5900 BPH|
*Dependent on RPM and material characteristics.
|Flight Diameter||Flight Thickness||Flight Pipe||Flight Shaft|
Additional Sweep Carriers (if needed)
Keeps sweep flightings from “bottoming out” on uneven floors.
Steel wheel durability and rubber wheels traction; offset cams produce positive movement in grain; height adjustment for uneven floors; greasable bronze bearings
Attaches to the inside of the bin wall; limits the sweep to one revolution
Reduction Drive End Wheels
Limits wheel spin; provides longer wheel life
Eases positioning of the sweep over the center sump; similar to Series II Sweep
Includes dual foam filled tires, weight bracket, four suitcase weights and 3/4 HP explosion proof motor (contact factory for explosion proof applications); this option requires an Auto Advance System
DO NOT OPERATE THE SWEEP ARM FULLY ASSEMBLED ON THE FIRST PASS UNLESS APPROVED BY THE BIN MANUFACTURER.
DO NOT LEAVE THE SWEEP ATTACHED TO THE CENTER SUMP WHEN FILLING THE BIN. GRAIN WEIGHT ON THE SWEEP MAY PREVENT GATE FROM MOVEMENT, DAMAGING THE SUMP AND/OR SWEEP.