8″ Seed Belt Conveyor

Cleated belt conveyors are a sound choice for any general conveying use, but have been proven to be uniquely suited for seed treating applications. Cleated conveyors offer the gentle handling of a traditional belt conveyor, but offer better capacity retention at increasing incline angles. The patented cleated belt design forms a cup inside the tube as the material is being conveyed which prevents material fall back, while gently carrying the seed up the incline.

• Available in 17, 21, 25, and 32 ft. lengths.
• Spout for gentle transition from the incline belt to the discharge.
• Top and bottom adjustments for belt tension and tracking.
• Cleated belting moves seed quickly and gently.
• Steel intake.

_{Capacity is at approx. 400 FPM belt speed and will vary with material type and conveyor incline. Consult your seed dealer for belt speed recommendations. Hydraulic drive allows a wide range of belt speeds.}

Tube: 14 ga. galvanized 8” tube with stan-dard wind skirt for belt return.
Belting: 12” PVC belt with 1½ x 7” cleats spaced on 6” centers. Vulcanized drive roller; self cleaning bottom roller; top and bottom SCM bearings for belt tension and tracking.
Drive: 5 HP electric or 6.2 CID hydraulic drive.
Transport: Timken roller bearings for road use.  2” x 3” lower arms, 2” x 4” upper arms.  80” transport width.

Optional folding intake: Allows the conveyor to reach low clearance seed outlets in trucks, wagons, etc. When the conveyor is in position, the intake is raised, minimizing spillage.