- Specifications
- Photos
Underbin System
Features
- Complete underbin systems for concrete or dryer floor bins to 49′ 6″ in diameter.
- Underbin systems are available in diameters of 6, 8 and 10 inches.
- Shipped complete with center and intermediate sumps, control rods and bin wall plates.
- Concrete and dryer floor applications both available.
- Capacities range from 1,000 bushels per hour to 3,800 bushels per hour, depending on which power head is ordered.
Specifications
| Auger Diameter | Tube Gauge | Flight Guage | Flight Pipe OD-ID |
|---|---|---|---|
| 6″ | 14 | 10 | 1¼” – 1” |
| 8″ | 14 | 3/16″ | 1½” – 1¼” |
| 10″ | 12 | 3/16″ | 2½” – 1½” |
| 12″ | 12 | 1/4″ | 2-7/8” – 2”* |
* Collared down to 1½” ID
Capacities
| Unloading Auger Type | Transitions (Underbin to unloading auger) | ||
|---|---|---|---|
| 6″ – 8″ | 8″ – 10″ | 10″ – 12″ | |
| Vertical, Single Drive | 1,000 – 1,200 | 2,200 – 2,600 | 3,600 – 3,800 |
| Vertical, Double Drive | – | 2,200 – 2,600 | 3,600 – 3,800 |
| Incline, Right Angle | 1,000 – 1,200 | 2,200 – 2,400 | 3,600 – 3,800 |
| Incline, 27 Degree | 1,000 | 2,000 | 3,200 |
| 6″ – 6″ | 8″ – 8″ | 10″ – 10″ | |
| Horizontal | 1,000 – 1,200 | 2,200 – 2,600 | 3,600 – 3,800 |
* Capacity is reduced when the sweep is operating.
Underbin Auger Tube & Flighting
Underbin auger tube and flighting is available in 6″, 8″ and 10″ diameters. Order the auger tube, flightings, and sumps seperately as needed. Auger tubes are galvanized. Right or lefthand flights are available.
Sumps for Concrete & Dryer Floors
Sudenga’s center sumps have ¾” ID tubes for sweep pivots. The center sump gates have UHMW rollers and the intermediates have UHMW slides. All sump edge flanges are 2” wide. 10” sumps are identical for both floor types.
Sump Controls, End Caps, Bin Wall Plates
Sump control kits include a center sump control pipe, intermediate sump control pipe, and control handles. Concrete floor kits also include control guides. Order additional pipes/guides as needed for additional intermediate sumps. With dryer floor setups, use one control pipe to operate the center sump and one or two control pipes to operate the intermediate sumps. Control guide brackets prevent the control pipes from bowing.
Bin Unloaders / Powerheads
Vertical Bin Unload, Single Drive: 16′ augers available for 6”, 8”, and 10” underbin systems. Sleeved (left and righthand flight) or flanged (righthand only) mount.
Vertical Bin Unload, Double Drive: 16′ augers available for 8” and 10” underbin systems. Sleeved (left and righthand flight) or flanged (righthand only) mount.
Inclined Bin Unload, Right Angle: 16′ augers available for 6″ and 8″ underbin systems. 20′ augers available for 8″ and 10″ underbin systems. PTO drive available with sleeve mounts. Electric drive available with sleeve or bolted flange mounts. For lefthand underbin flights only.
Inclined Bin Unload, 27°: 5’ augers available for 6” and 8” underbin systems. 7’ lengths available for 6″, 8” and 10” underbin systems. Sleeve mount for right or lefthand underbin flights. Bolted flange mount for righthand underbin flights. Electric or hydraulic drive.
Horizontal Bin Unload: 24″ auger available for 6″, 8” and 10” underbin systems. Sleeve mount for right or lefthand underbin flights. Bolted flange mount for righthand underbin flights. Electric or hydraulic drive.
