Round Tube Augers

Sudenga offers a large array of components and accessories for conveyor installations. Many different drives, motor mounts, intakes, hoppers and mounting brackets allow plenty of flexibility in designing your system. Various styles of spouting, discharges, directional flow valves, and adaptors make it easy to set up a delivery system that really works for you. Round augers convey any free flowing material where particle size is less than 1/3" of the auger diameter. Augers must have all guarded intakes in place during operation.

Available in 6", 8", 10" or 12" diameters

Standard or heavy-duty augers

Direct, chain reduction, and helical gear drive

Motor mounts for all applications

Intakes, discharges, valves, adaptors, mounting brackets, etc.

Work well in grain handling systems with continuous flow dryers, livestock feeding systems, and overbin installations.

Available in 4 styles:       

RA-1000 Series

Standard duty augers

Wood block hanger bearing

Direct, roller chain or helical gear drive

Recommended for applications from horizontal to 40°

RA-900 Series

Standard duty augers

Without wood block hanger bearings

Direct, roller chain or helical gear drive

Recommended for applications from horizontal 90°

RA-800 Series

Heavy-duty augers

Wood block hanger bearings

Bolted flange at the end of drive

Double bearing direct or helical

Recommended for applications from horizontal to 40°

RA- 700 Series

Heavy-duty augers

Without hanger bearings

Bolted flange at the drive end

Double bearing direct or helical gear drive

Recommended for applications from horizontal 90°

Direct drive, chain reduction, and helical gear drives are available. Hanger bearings are two-piece wood block or one-piece bronze styles. Reduction drive is recommended for horizontal augers with intermediate discharges. Direct drive may produce conveying speeds that allow material to be carried across the intermediate discharges. For higher capacities, choose a larger auger rather than increasing the RPM.

_{*Pipe is 2" ID- sleeved down to 1-1/2".}

_{Capacities are based on 14-15% moisture content. The tube fill rate is 65% for horizontal augers and 55% for 40° inclined augers. Changes in moisture content and fill rates will alter capacities.}