[MAX] 4012 Low-Profile Conveyors

Find a Dealer

Sudenga Industries pioneered this unique concept in drag chain conveyors. These innovative low-profile conveyors feature big capacity with the advantage of minimized installation cost and the long term durability of drag conveyors. The Model 2610 is rated at capacities to 7500 BPH and the Model 4012 will handle up to 10,000 BPH (corn). The Model 2610 only requires a trench that is 16 inches deep, while the 4012 require a trench 18 inches in depth. Great in retrofit applications where space or ground water is an issue. Originally developed to feed bucket elevators from shallow drive over pits, thousands of applications later these units can be found loading out to semi-trailers or returning grain to the leg from a low clearance loadout. Interchangeable hopper gratings and bridge sections allow for custom intake configurations.

<Return to MAX home page

 

Standard Features

 

► Up to 10,000 BPH unloading rates

► 19" deep trench open at both ends for drainage

► 10 ga. galvanized horizontal and inclined trunking

► 10 ga. painted head, 45° corner, and tail sections

► Commercial duty shaft mount gear reducer

► 1-15/16" shaft and 8-tooth sprocket in head and tail sections

► Double D81X chain with polyethylene paddles

► 14" deck height

► "Drive over" sections are available in 1', 2', 4', and 10' lengths

► Intake gates and solid drive over covers can be repositioned for full width, center or side discharge situations

► 21" x 40" outlet to the elevator leg, reducer provides a 12" x 24" outlet to the leg

► Conveyors require a trough 48" wide and 19" deep

► Intake grating and solid covers are positioned (and changed) on the conveyor as required. You can have intake grates all the way across the drive over area, a center intake for trailers and trucks, or a side intake for wagons. Solid covers are used where tires cross the conveyor to keep out mud, trash, etc.

 

Specifications

 

Neck Dimensions

Inclined Trunk Length

Discharge Height with Reducer

Discharge Height without Reducer

Horizontal Length

15'

10'-9"

11'-10"

15'-1"

14'

10'

11'-1"

14'-4"

13'

9'-4"

10'-5"

13'-8"

12'

8'-7"

9'-8"

12'-11"

11'

7'-11"

9'

12'-3"

10'

7'-2"

8'-3"

11'-6"

9'

6'-6"

7'-1"

10'-11"

8'

5'-9"

6'-10"

10'-1"

7'

5'-1"

6'-2"

9'-5"

6'

4'-3"

5'-4"

8'-8"

5'

3'-8"

4'-9"

8'