ALST Series (Aluminum ST)
Find a Dealer
The ALST feed truck (Aluminum ST Series) from Sudenga features twin screw floor augers that allow for a lower body height and increased stability since more of the load is closer to the frame. Lower body height is ideal for locations with overhead clearance issues. The steep 45 degree sloped sides make for quick unloading and the large lower body means more capacity.
Unload speed: 3,500 pounds per minute Capacities: 471-1,239 cubic feet
Twin floor augers providing large capacities with an unloading rate of 3500 lb/min
U-Trough floor augers and 38° body slope for positive material plow
True 90° vertical auger moves discharge auger to a 270° arc
All welded aluminum tank, bulkheads, and base
One-piece, full length, extruded top opening for extra strength
Shur-Lok roll tarp or one-piece tank lid with manual crank, air or electric-over-air lid opener
Upright (true) vertical auger (no freewheeling)
Double seal individual rack and pinion (Patent No. 5,658,116) with nylon roller guides
High profile fender
All ICC required lights and reflectors
Augers and Hydraulics System:
8" floor augers, 12" cross and vertical augers, 10" discharge auger
270°, hydraulic raise and rotate on discharge auger
Worm drive rotation for discharge auger with controls at the driver's door
Wood hanger bearings on the floor auger
Front mount control valves
Rear pit discharge on floor auger
Direct couple Tandem pumps
Orbit type auger motors
29-gallon reservoir with filter
Automatic speed control (matches bottom auger to vertical, allowing a variety of material to be conveyed without plugging)
3-function radio control (auger operation and discharge auger position)
Pressure activated shut-off in the unloading system
Standard cube or high cube bodies- both available with center or easy fill (center/side) top openings
Tire disinfectant system for disease control
Live power clutch pump
Air wand for compartment clean out
Front mount flush tank
HD bumpers with incandescent or LED lights
Side curtains for bagged feed
|Auger Length||Discharge Height|
|A- Body Length||12'||13-1/2'||16'||18'||20'||22-1/2'||24'||27'|
|B- Overall Length||15'-8"||17'-2"||19'-8"||21'-8"||23'-8"||26'-2"||27'-8"||30'-8"|
|Body Weight1 (lbs.)||4958||4987||5517||5721||6055||6324||6683||7259|
|Cab to Axle||108"||138"||120"*||144"*||186"*||180"**||180"**||180"**|
|No. of Compartments||3||3||4||4||5||5||6||6|
1 Body weights are approximates and will vary with options selected.
* Cab to center of tandem.
**Cab to center of triple axles.
Cab to axle figures are only recommendations developed from trucks commonly used by our customers. Accuracy in all situations cannot be guaranteed. Consult your truck dealer for chassis recommendations.
|Capacities (cu. ft)|
|Standard Cube Body||471||528||628||706||785||881||942||1021|
|High Cube Body||525||591||700||788||875||985||1050||1138|
|Easy Fill (Std. Cube)||493||555||658||740||822||925||986||1069|
|Easy Fill (High Cube)||551||620||734||826||918||1033||1102||1194|
Trucks with frame ratings of 2,800K RBM per rail and 18K front axle bodies are recommended for bodies of 15 ton capacity or larger.
Air ride suspension is recommended for tandem and triple axle chassis. Bodies to be mounted on tractors must fit without having the frame stretched.